| |
This sensor is fitted in the fuel tank to monitor the fuel volume, with the measuring circuit specially calibrated for the tank shape of the vehicle concerned. |
|
| |
|
|
| |
Electrical Ratings :
|
|
| |
System voltage: 12V or 24V
|
|
| |
System polarity: Negative earth |
|
| |
|
|
| |
Thermal:
|
|
| |
Temperature ranges: |
|
| |
Functional –30°C to +85°C |
|
| |
|
|
| |
Mechanical Characteristics:
|
|
| |
Weight up to 113g Full specification. |
|
| |
Float arm lengths: 75mm to 800mm radius |
|
| |
|
|
| |
Dimensions: |
|
| |
Dimensions: Fully detailed drawings can be prepared on receipt of Fuel System details. |
|
| |
|
|
| |
Design features: |
|
| |
Thick film measuring circuit gives superior accuracy to a conventional wire wound resistance. Measuring circuit consists of thick film ceramic tile with palladium silver conductor pattern printed with resistive ink. |
|
| |
Laser trimming of measuring circuit guided by computer aided design data further improves accuracy. |
|
| |
Wiper arm and resistor pattern interface by a dual nickel silver contact and phospher bronze carrier blade. |
|
| |
Improved thick film circuit design eliminates intermittencies and increases service life. |
|
| |
|
|
| |
Corrosion Protection: |
|
| |
Plastic body withstands degradation in petrol and/or methanol mixture environment. |
|
| |
|
|
| |
Reliability: |
|
| |
Ingenious yet simple construction provides greatly improved reliability in service. |
|
| |
|
|
| |
Mounting Options:
|
|
| |
Top and side mounting versions |
|
| |
|
|
| |
Fitment:
|
|
| |
Location lugs. Face sealing with seal between inner face of unit and tank. |
|
| |
Cam locking from 5.5/13.5Nm. |
|
| |
|
|
| |
Feed Pipes:
|
|
| |
Internal metal feed and return pipes with filter available (if required). |
|
| |
|
|
| |
Low Fuel Warning:
|
|
| |
The feature can be included at design stage. |
|
| |
|
|
| |
Maintenence:
|
|
| |
No maintenence required |
|
| |
|
|
| |
Outlets:
|
|
| |
Variations available through inserts in the main mould tool.
Snap fit pipe connection elbow for flow and spill return. |
|
| |
|
|
| |
Termination:
|
|
| |
Blade connection to BS 5057. |
|
| |
6.3mm 250 series. |
|
| |
Can be customised to suit customer requirements. |
|
| |
Environmental sealed connector. Options available. Also quick fit fuel inlet/outlet. |
|
| |
Fitment can be customised to suit any
customer requirement. |
|
|
|
|
| |
Warranty:
|
|
| |
Minimum 12 months, extended warranty is negotiable dependent on application. |
|
